Diamond File CHUOKU — Coated Diamond Files, 6–12 in, All Shapes
Description
Diamond File CHUOKU — Coated Diamond Files, 6–12 in, All Shapes
CHUOKU diamond files are made from quality coated diamond grit that holds firmly without shedding, stays sharp, and shapes hard materials that ordinary steel files cannot — such as carbide, glass, mould work, and hardened steel. Available in 6–12 inch lengths and several cross-sections: flat, knife, half-round, triangle, round, and square. Supplied by BOWMAP Industry & Tooling, Samut Prakan.
Specifications
| Brand | CHUOKU |
|---|---|
| Type | Diamond file (coated diamond grit) |
| Lengths | 6, 8, 10, 12 in |
| Cross-sections | Flat · knife · half-round · triangle · round · square |
| Suitable for | Carbide, glass, mould work, hardened steel |
| Not for | Soft or mild steel (chips clog the teeth and dull the file) |
| Parts | File + handle (press-fit firmly; do not drive on with a steel hammer) |
Use cases
- Dressing carbide and hardened steel that ordinary files cannot touch
- Edge dressing and detail work on moulds and dies
- Finishing glass and hard, brittle materials
- Deburring and detailing small parts that need fine work
- Jewellery work and tasks needing a fine, sharp file
Compatibility
Always fit a handle before use for safety and control. Choose the cross-section to match the surface (e.g. round/half-round for curved grooves, triangle for inside corners). File on the forward stroke and apply pressure only going forward — release on the return stroke to preserve the diamond edge.
Availability
In stock at the BOWMAP warehouse in Samut Prakan, ready for same-day pickup or next-day delivery across Bangkok and the surrounding provinces. Contact us for bulk pricing on large orders.
Related products
- CHUOKU diamond burrs / diamond discs
- ใบตัดเพชร 4″ Electroplate
- Diamond stones / diamond wheels
- File handles
FAQ
How is a diamond file different from an ordinary steel file?
A diamond file is coated with diamond grit, which is harder than almost any material, so it can file hard work such as carbide, glass, and hardened steel — things a steel file cannot. But a diamond file is not for soft or mild steel, because soft chips clog the teeth and dull the cutting action.
Can I use it on soft materials?
Not recommended — mild steel or soft material clogs the diamond teeth and dulls the file quickly. Use diamond files only on hard materials, clean along the teeth with a wire brush, and never knock the file against a bench.
How do I care for a diamond file?
Keep it free of oil (oil makes it slip and stop cutting), prevent rust, store it apart from other tools, and wrap it in corrugated paper so edges don't knock together. Clean along the teeth with a brass wire brush to keep it sharp and long-lasting.
